Standard Continuous Hinges

australian made | high quality | direct from manufacturer

All of our hinges are manufactured here at our factory in Minto and we have an extensive range of Standard Continuous Hinge options available. Using our Australian-made hinges ensures that you always get a high quality product with consistent sizes and reliable locally made supply.

shop now

Shop our in stock range now

While it is hard to stock every option available, we have used our 35 years of industry experience to select the most popular sizes to keep on the shelf. These hinges are our Standard In Stock Range (SISR) and are ready to ship immediately.

  • Australian made

  • Consistent sizes and excellent quality

  • Made from Quality material

  • Reliable supply

  • Quick turnaround times

  • In stock or made to order with quick lead times

explore our range of hinges

Advantages of Continuous Hinges

  • Superior strength, security and durability

  • Evenly distributes load down the entire length of mounted surfaces

  • Superior weight bearing capacity

  • Easy alignment and installation

  • Longer life span

  • Quiet in operation

  • Increased security and Privacy

  • Superior weather proofing properties – reduced gaps

  • Provides a seamless look by eliminating gaps between mounted surfaces compared with the use of butt hinges

Standard In Stock Range

Can’t find what you’re looking for?

We have many more sizes available that can be made to order. Please see our Hinge dimensions table in our resource centre for our full list of hinges.

304 2B Stainless Steel
Piano Hinges

304 2B Stainless Steel
Piano Hinges | Pre-punched

316 2B Stainless Steel
Piano Hinges

316 2B Stainless Steel
Piano Hinges | Pre-punched

Galvabond
Piano Hinges
Aluminium
Piano Hinges
Mild Steel
Piano Hinges

304 2B Stainless Steel Piano Hinges

Stainless steel has a high resistance to corrosion. Extensively used for consumer products, service and recreational vehicles, appliances, architectural products, commercial and domestic kitchens, hospital equipment and all manner of food service applications. It withstands rusting, organic chemicals and a wide variety of organic material.

Stock Code Description
S3212S24-SISR 32 X 1.2 X 2438MM LONG 304 2B S/S HINGE – 3.15MM S/S PIN click for quote
S3812S18-SISR 38 X 1.2 X 1828MM LONG 304 2B S/S HINGE – 3.15MM S/S PIN click to buy
S3812S24-SISR 38 X 1.2 X 2438MM LONG 304 2B S/S HINGE – 3.15MM S/S PIN click to buy
S5012S18-SISR 50 X 1.2 X 1828MM LONG 304 2B S/S HINGE – 3.15MM S/S PIN click to buy
S5012S24-SISR 50 X 1.2 X 2438MM LONG 304 2B S/S HINGE – 3.15MM S/S PIN click for quote
S3815S18-SISR 38 X 1.5 X 1828MM LONG 304 2B S/S HINGE – 5MM S/S PIN click to buy
S3815S24-SISR 38 X 1.5 X 2438MM LONG 304 2B S/S HINGE – 5MM S/S PIN click for quote
S5015S18-SISR 50 X 1.5 X 1828MM LONG 304 2B S/S HINGE – 5MM S/S PIN click to buy
S5015S24-SISR 50 X 1.5 X 2438MM LONG 304 2B S/S HINGE – 5MM S/S PIN click for quote
S5715S18-SISR 57 X 1.5 X 1828MM LONG 304 2B S/S HINGE – 5MM S/S PIN click to buy
S6415S18-SISR 63 X 1.5 X 1828MM LONG 304 2B S/S HINGE – 5MM S/S PIN click to buy
S6415S24-SISR 63 X 1.5 X 2438MM LONG 304 2B S/S HINGE – 5MM S/S PIN click for quote
S7615S24-SISR 76 X 1.5 X 2438MM LONG 304 2B S/S HINGE – 5MM S/S PIN click for quote
S502S18-SISR 50 X 2.0 X 1828MM LONG 304 2B S/S HINGE – 6.35MM S/S PIN click for quote
S762S24-SISR 76 X 2.0 X 2438MM LONG 304 2B S/S HINGE – 6.35MM S/S PIN click to buy
S1002S24-SISR 100 X 2.0 X 2438MM LONG 304 2B S/S HINGE – 6.35MM S/S PIN click for quote
S763S18-SISR 76 X 3.0 X 1828MM LONG 304 2B S/S HINGE – 8.0MM S/S PIN click for quote
S763S24-SISR 76 X 3.0 X 2438MM LONG 304 2B S/S HINGE – 8.0MM S/S PIN click for quote
S1003S18-SISR 100 X 3.0 X 1828MM LONG 304 2B S/S HINGE – 8.0MM S/S PIN click for quote
S1003S24-SISR 100 X 3.0 X 2438MM LONG 304 2B S/S HINGE – 8.0MM S/S PIN click for quote

316 2B Stainless Steel Piano Hinges

Stainless steel has a high resistance to corrosion. Extensively used for consumer products, service and recreational vehicles, appliances, architectural products, commercial and domestic kitchens, hospital equipment and all manner of food service applications. It withstands rusting, organic chemicals and a wide variety of organic material.

Stock Code Description
S3212S24-SISR-316 32 X 1.2 X 2438MM LONG 316 2B S/S HINGE – 3.15MM S/S PIN click to buy
S3812S24-SISR-316 38 X 1.2 X 2438MM LONG 316 2B S/S HINGE – 3.15MM S/S PIN click to buy
S5012S24-SISR-316 50 X 1.2 X 2438MM LONG 316 2B S/S HINGE – 3.15MM S/S PIN click to buy
S5015S24-SISR-316 50 X 1.5 X 2438MM LONG 316 2B S/S HINGE – 4.76MM S/S PIN click to buy
S762S24-SISR-316 76 X 2.0 X 2438MM LONG 316 2B S/S HINGE – 6.35MM S/S PIN click to buy

Galvabond® G2

Galvabond® G2steel is a hot-dipped, zinc-coated, commercial forming steel with a spangled surface, suitable for general manufacturing. Typical uses include air conditioning ducts, air conditioning panels, meter boxes, trailers.

Stock Code Description
G3812G18-SISR 38 X 1.2 X 1828MM LONG GAL HINGE – 3.15MM S/S PIN click to buy
G3812G24-SISR 38 X 1.2 X 2438MM LONG GAL HINGE – 3.15MM S/S PIN click for quote
G5012G18-SISR 50 X 1.2 X 1828MM LONG GAL HINGE – 3.15MM S/S PIN click for quote
G3815G18-SISR 38 X 1.5 X 1828MM LONG GAL HINGE – 5MM S/S PIN click for quote
G5015G18-SISR 50 X 1.5 X 1828MM LONG GAL HINGE – 5MM S/S PIN click to buy
G5015G24-SISR 50 X 1.5 X 2438MM LONG GAL HINGE – 5MM S/S PIN click to buy
G762G24-SISR 76 X 2.0 X 2438MM LONG GAL HINGE – 6.35MM S/S PIN click for quote
G1002G24-SISR 100 X 2.0 X 2438MM LONG GAL HINGE – 6.35MM S/S PIN click for quote
G763G18-SISR 76 X 3.0 X 1828MM LONG GAL HINGE – 8.0MM S/S PIN click for quote
G763G24-SISR 76 X 3.0 X 2438MM LONG GAL HINGE – 8.0MM S/S PIN click to buy
G1003G18-SISR 100 X 3.0 X 1828MM LONG GAL HINGE – 8.0MM S/S PIN click for quote
G1003G24-SISR 100 X 3.0 X 2438MM LONG GAL HINGE – 8.0MM S/S PIN click for quote

Aluminium (5005 Mill Grade)

Aluminium is a highly corrosive resistant material and has the advantage of also being lightweight; around one third the weight of steel.

Stock Code Description
A3812A24-SISR 38 X 1.2 X 2400MM LONG 5005 H34 ALUMINIUM HINGE – 3.15MM S/S PIN click for quote
A5012A24-SISR 50 X 1.2 X 2400MM LONG 5005 H34 ALUMINIUM HINGE – 3.15MM S/S PIN click to buy
A3815A24-SISR 38 X 1.5 X 2400MM LONG 5005 H34 ALUMINIUM HINGE – 5MM S/S PIN click to buy
A5015A24-SISR 50 X 1.5 X 2400MM LONG 5005 H34 ALUMINIUM HINGE – 5MM S/S PIN click to buy
A502A24-SISR 50 X 2.0 X 2400MM LONG 5005 H34 ALUMINIUM HINGE – 6.35MM S/S PIN click for quote

Mild Steel

Mild steel contains the same properties as iron, although it has increased carbon content. Mild steel is relatively low cost and provides material properties accepted for many applications. However, this also makes it susceptible to rusting; this occurs when the material comes in contact with water and oxygen. Where salt is present, usually in salt water, the effect is exaggerated.

Stock Code Description
M5015M24-SISR 50 X 1.5 X 2438MM LONG M/S HINGE – 5MM M/S PIN click for quote
M7615M24-SISR 76 X 1.5 X 2438MM LONG M/S HINGE – 5MM M/S PIN click to buy
M502M24-SISR 50 X 2.0 X 2438MM LONG M/S HINGE – 6.35MM M/S PIN click for quote
M1003M18-SISR 100 X 3.0 X 1828MM LONG M/S HINGE – 8.0MM M/S PIN click to buy
M1003M24-SISR 100 X 3.0 X 2438MM LONG M/S HINGE – 8.0MM M/S PIN click for quote

Standard Pre-punched Range

304 2B Stainless Steel Piano Hinges

Do you need a continuous Hinge with holes already punched? We have a standard pre-punched range of continuous hinges in stainless steel that are accurately punched in a standard hole pattern. We keep this in stock for your convenience.

Stock Code Description
PS-WCH2512S24H 25 X 1.2 X 3 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH3212S12H 32 X 1.2 X 3 X 1200MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH3212S18H 32 X 1.2 X 3 X 1800MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH3212S24H 32 X 1.2 X 3 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH3812S12H 38 X 1.2 X 3 X 1200MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH3812S18H 38 X 1.2 X 3 X 1800MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH3812S24H 38 X 1.2 X 3 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH5012S18H 50 X 1.2 X 3 X 1800MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH5012S24H 50 X 1.2 X 3 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH7612S24H 76 X 1.2 X 3 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END.HOLES TO BE STAGGERED 11 AND 22MM IN FROM THE EDGE OF THE LEAF. click for quote
PS-WCH3815S12H 38 X 1.5 X 5 X 1200MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH3815S18H 38 X 1.5 X 5 X 1800MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH3815S24H 38 X 1.5 X 5 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH5015S18H 50 X 1.5 X 5 X 1800MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH5015S24H 50 X 1.5 X 5 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click for quote
PS-WCH5715S18H 57 X 1.5 X 5 X 1800MM LONG S/S 304 2B HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH7615S24H 76 X 1.5 X 5 X 2400MM LONG S/S HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END.HOLES TO BE STAGGERED 11 AND 22MM IN FROM THE EDGE OF THE LEAF. click for quote

Standard Pre-punched Range

316 2B Stainless Steel Piano Hinges

Do you need a continuous Hinge with holes already punched? We have a standard pre-punched range of continuous hinges in stainless steel that are accurately punched in a standard hole pattern. We keep this in stock for your convenience.

Stock Code Description
PS-WCH3212S24H-316 32 X 1.2 X 3 X 2400MM LONG S/S 316 HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH3812S24H-316 38 X 1.2 X 3 X 2400MM LONG S/S 316 HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH5012S24H-316 50 X 1.2 X 3 X 2400MM LONG S/S 316 HINGE WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
PS-WCH5015S24H-316 50 X 1.5 X 2400MM LONG 316 2B S/S HINGE – 4.76MM S/S PIN WITH 5MM DIA HOLES @ 100MM CENTRES OFFSET 20MM STARTING 40 AND 60MM IN FROM EACH END. click to buy
We have many more sizes available that can be made to order. See our full list of hinge sizes and dimensions in the resource centre

Need help finding your best solution?

speak to our hinge experts